How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Agriculture and Farm Equipment
Satisfied Customers: 3204
Experience:  Technican turned service manager on multiple lines of equipment and rental equipment.
30244710
Type Your Agriculture and Farm Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Ford jubilee. gets air in pump after bleeding.

Customer Question

ford jubilee. gets air in pump after bleeding.
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Customer: replied 1 year ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Customer: replied 1 year ago.
i get no responce from you about my pronlem. i would like to reject my association with your service.
Expert:  Curtis B. replied 1 year ago.
This is the gas engine? What has been checked? Fuel pump has to be vacuum tight for the pump to function.
Customer: replied 1 year ago.
you should know that a jubilee is a gas tractor and has no fuel pump.
Customer: replied 1 year ago.
can i cancel with you and not be charged?
Expert:  Curtis B. replied 1 year ago.
What pump is getting air? I assumed fuel. You mean the hydraulic pump?
Customer: replied 1 year ago.
no phone call as yet. hydraulic pump has been over hauled. after bleeding hydraulics will operate for a short time but after an hour or so it quits and has to be bled again.
Expert:  Curtis B. replied 1 year ago.
The pump has to be vacuum tight, have you checked the pipes and gaskets for leaks?
Customer: replied 1 year ago.
i got no answers to my problem and no phone call after requesting one. thanks for your help.
Expert:  Curtis B. replied 1 year ago.
The pump has to be vacuum tight, have you checked the pipes and gaskets for leaks?