How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 8439
Experience:  34 + years as a mechanic
6825259
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have a toro model #30112 mower. How do I Remove the wheel?

Customer Question

I have a toro model #30112 mower. How do I Remove the wheel?
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  Wayne replied 1 year ago.
Hi I'm Wayne
I will help you with this
what wheel do you want to remove ,rear
let me know
Customer: replied 1 year ago.
left rear. I've already removed the cotter pin and washer. just don't know what to do from there
Expert:  Wayne replied 1 year ago.
Thank you for that
it just pulls straight back
may have to hit with a rubber hammer from back side to loosen
the bearings is holding it on to the spindle
If this helped you, Please rate my answer
If Not, Please USE REPLY BUTTON FOR MORE INFO
Customer: replied 1 year ago.
seems like there is a drive pully and brake setup that is connected to the wheel and in the way of hitting with a hammer
Customer: replied 1 year ago.
does that all come off as one piece?
Expert:  Wayne replied 1 year ago.
HI
Sorry for delay,
no that all stays on the machine, the rim and wheel just comes off
also there maybe 1 bolt on the back side that screws into it
remove that bolt
Customer: replied 1 year ago.
Well Wayne the whole thing comes off in one piece. there are four bolts that connect the belt pullies and brake drum to the wheel. But what a tight fit. Got it and thanks for the help.
Expert:  Wayne replied 1 year ago.
Hi
You are welcome
I knew about the 1 bolt, but models change
Expert:  Wayne replied 1 year ago.
Hi
I'm just following up with you
Did my answer help
Let me know
Wayne