How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 503
Experience:  Service manger for over 18 years in same Dealership
15057492
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

I have a 277 square baler. on the hay feed assembly i set

Customer Question

i have a 277 square baler. on the hay feed assembly i set my front forks 6.5" from front bolt and back forks at 18". i am still getting bananna bales. not enough hay on left side if you were standing behind the baler. which way should i move my forks to try to correct the problem?
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  dd85 replied 1 year ago.
See attachment for bale shape correction.Please remember to Rate my answer.
Expert:  dd85 replied 1 year ago.
adjust left tines to left, until well shaped bale is produced.
Expert:  dd85 replied 1 year ago.
Did this take care of the problem?
If so please remember to Rate my answer.