How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dd85 Your Own Question
dd85
dd85, Foreman
Category: Agriculture and Farm Equipment
Satisfied Customers: 493
Experience:  Service manger for over 18 years in same Dealership
15057492
Type Your Agriculture and Farm Equipment Question Here...
dd85 is online now
A new question is answered every 9 seconds

I can't get the drive shaft of a new Landpride tiller to slide

Customer Question

I can't get the drive shaft of a new Landpride tiller to slide all the way onto the PTO shaft of my NH Boomer 30/40. The spring button works OK when I check it but the tiller shaft will only slide on about 1" before it meets total resistance. What am I doing wrong? Thanks. Chuck
Submitted: 1 year ago.
Category: Agriculture and Farm Equipment
Expert:  dd85 replied 1 year ago.
Have you been able to attach other pto shafts to your Boomer? If so then it is probally in the tiller pto shaft. Remove the pto shaft from the tilled, and try it on another tractor shaft. It sounds like the button is not sliding far enough to have a clear path for the pto shaft. Have you looked inside the tiller pto to see if groove is clear?
Expert:  dd85 replied 1 year ago.
Did you find the problem?