How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne, Journeyman
Category: Agriculture and Farm Equipment
Satisfied Customers: 8273
Experience:  34 + years as a mechanic
Type Your Agriculture and Farm Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

labor time to R&R rear main seal jd 4840

Resolved Question:

labor time to R&R rear main seal jd 4840
Submitted: 3 years ago.
Category: Agriculture and Farm Equipment
Expert:  Wayne replied 3 years ago.
Hi I'm Wayne
I would like to help you with this
Are you sure about the Model 4840
year 1995

Reason I ask they were made from 1978 - 1982
Customer: replied 3 years ago.
honestly no i dont as ive not even seen it yet, i just put a year
Expert:  Wayne replied 3 years ago.
Thank you for that
Presuming that it is a 4840
they would swing the engine forward, and lift enough to get to seal,
or split , drag trans back

labor time is 27.4 hours , what ever you labor rate is where you live
most shops are between $55.00 to 75.00 Per Hour
Customer: replied 3 years ago.
yea ill have to split it. thank you. is there a program i can but with this info like mitchell? thank you for the answer
Expert:  Wayne replied 3 years ago.
HI Yes
Mitchell on demand should have it
or buy the repair/shop manual

Wayne and other Agriculture and Farm Equipment Specialists are ready to help you
Customer: replied 3 years ago.
ok ty!!!
Expert:  Wayne replied 3 years ago.
your welcome

Related Agriculture and Farm Equipment Questions