How to install top transmission cover 385 International diesel ttractor
put top on and it's not in the right gear
You have to get the transmission gears in the neutral position, then the shifter is placed in the neutral slot in the shift forks, then the cover is installed, just put bolt in each corner and test, before finishing.
all the slots should be in line in neutral. and the gears should be freewheeling.
Does it have slkots or do the gears have grooves the shift forks fit in?
It has groves, how do you make sure it is the neutral position
Single shift lever or two? You have shown 385 and 384??
You rotate the gears, in neutral the gears with the grooves will rotate.
Line up the shift fork with the groove and install the cover.
will try this in the am Friday, we will save this info for now
Ok, thank you.
Technican turned service manager on multiple lines of equipment and rental equipment.
Our chat has ended, but you can still continue to ask me questions here until you are satisfied with your answer. Come back to this page to view our conversation and any other new information. What happens now? If you haven’t already done so, please rate your answer above. Or, you can reply to me using the box below.
I can't find a place to click submit. We are satisfied with this service.
site has been down on my side all day! Let me know if I can help! Thank you.