7210 Hyd remotes on rear after tractor warms-up quits operating but front-end loder works & 3 point still do let tractor set over night works till unit warms up any help or ideas thanks
Already Tried: Changed Hyd filter cheeck fluid levels & couplers.
Hi, I’m a moderator for this topic and I wonder whether you’re still waiting for an answer. If you are, please let me know and I will do my best to find a Professional to assist you right away. If not, feel free to let me know and I will cancel this question for you. Thank you!
what do you need to know ,
Hi I will help with you problem please don't rate until all your questions are answered that way you won't have to pay twice use the reply to expert button until we are done.Is this a picture off your hydraulic pump and is there any holes on the other side that lines go to?
yes, i think that it is if it is mounted under cab of tactor in the rear, thank you
Ok That pump is actually two pumps in one notice two outlets and one inlet,It sounds like the pump needs to be rebuilt.The reason I say this is as the pump wears from use and the most common complaint is it works when cold but after 30 min of work it starts slowing down and then goes out all together,what happens and customers don't understand is well they say some off my hydraulics work it can't be the pump,but it actually is.If you have any other questions just reply through reply to expert link otherwise it's been a pleasure helping out spanky
Experience: I worked on all types semis,forklifts,farm,fire,ect.