why does one of the hooks that pulls the string, sometimes miss?
cleaning and oiling the runners
Hi, I’m a moderator for this topic and I wonder whether you’re still waiting for an answer. If you are, please let me know and I will do my best to find a Professional to assist you right away. If not, feel free to let me know and I will cancel this question for you. Thank you!
yes iam still waiting thankyou.
yes iam waiting .
Thank you for your patience, your business is very important to us, we are waiting on the Professional with the right expertise to come online. Feel free to let us know if you would like us to continue searching for an Professional or if you would like us to close your question. Thank you for your understanding!
still waiting for a reply very dissapointed
Hi I will help with your problem Please do not rate until all your questions are answered that way you wont have to pay twice Use reply to expert link.Hi I just want to be sure we are talking about the same thing are you refering to the recoil start?
I am looking for a parts diagram so we can use the pictures so please bare with me a little longer
I have not been a bull to locate a breakdown do you possibly have one you can load to this answer box so we will be able to fix this if not I will keep searching thank you spanky
Hi sorry it took so long to be honest I forgot is was my fault.I found some info but I need the serial# XXXXX year if you have it and I will not forget this time again I am sorry.
model number of baler is kr125
serial number 341572 not sure of age
http://www.krone-na.com/1-294-0.pdfHere is a brake down of your baler parts diagram #6 part 6 is the guide for the string is this worn out.also look at the parts to see or show me were it is having a issue.
think the problem is in the chain in the cross carrier which carries the string across the bale
That is why I sent you the link because these things are touchy and any worn out part can cause your issue so you need to adjust and check for any slop in the system and replace worn parts and set up again according to instructions
Were you able to view link ok?
I feel like I'm letting you down I don't want to do that I want to help you better but I would need more specific questions or tell me the pages and what parts you need help with to determine your problem on this particular piece off equipment you need eyes on it and be able to check for excessive play and such.This is what you just replied to me [think the problem is in the chain in the cross carrier which carries the string across the bale] Is this a question or are you letting me know you found problem.That is what I'm talking about I need more info to help and I will do the best I can.So please be a little more specific with your replies
After much head scratching and a good power washing the problem seems to be lack tension in the chain. This could be of help to other people . Thanks for your help .
Ok thanks for passing that on I thought you already would have done that before starting to work on it that is how we do it I just didn't think I needed to tell you to clean. my mistake I will pass it on if I ever run into same problem I was looking for actual mechanical problem I hope you understand?If you feel the need to not pay me for my help then I hope you just don't leave me negative feed back I did try to help I found a parts breakdown for you and looked for common issues and passed along any way you would not have to pay any more for accepting my answer I did provide a service Thanks spanky
I worked on all types semis,forklifts,farm,fire,ect.
Thank you and have a good day spanky