TL 80 two wheel drive ROPS tractor will not start with key switch. I can remove fuse #1 and jumper across, the starter hits and with the key on, it fires right up. I've replaced the key switch and fuse #1. Any other ideas please
As mentioned replace the key switch and fuse #1 and of course cussing it
Is this New Holland product? If so I may be able to supply the wiring info you need. Please advise, Dan.
Here is some info that may help, if not let me know and I will opt out. Thanks, Dan.
This is helpful and thank you although the problem is still not solved. The trouble shooting chart leads me to change the relay. I've done that and unless I pruchased a bad second relay the problem is not solved. Concerning the inverter lever and the clutch pedal switch, I checked and jumpered around the clutch pedal switch no success,. The inverter lever switch is a mystery to me. Can you find more info for me on that subject. Confirmed it is a New Holland TL 80 Serial #1324327.
Hello, thanks for the reply back. See if this info helps on locations of inverter (76) and emergency start switch (78). On my fuse box it shows the 1 fuse being for fuel sediment filter. I also show two relays in the fuse box for the start circuit. Relay 1 and 2, swap those out with know good ones as well. I sent a photo of that box as well. Hope this info is helping, Dan.
Road mechanic for Volvo Construction Equipment.