How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Acura
Satisfied Customers: 33477
Experience:  35 years As a ASE Tech
7276279
Type Your Acura Question Here...
Ron is online now
A new question is answered every 9 seconds

Have a 2010 Ford F-350 diesel 6.4. And am having a 4x4

Customer Question

Have a 2010 Ford F-350 diesel 6.4. And am having a 4x4 problem it won't engage it just flashes the for hi light in the dash the transfer case will not engage installed new actuator and control module and still same result all the harness look good
Submitted: 5 months ago.
Category: Acura
Expert:  Ron replied 5 months ago.

Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

In order to determine why the system will not shift into 4X4 you are going to need to do some testing. I have enclosed the complete system file in the link below, start your testing at pinpoint test I. Copy and paste the link to your browser to open and view it.

https://dl.dropboxusercontent.com/u/104923897/Pinpoint%20tes%20I%20Jun%2018.pdf

See the wiring diagrams for the system in these links .

https://dl.dropboxusercontent.com/u/104923897/Shift%201%20Jun%2018.pdf

https://dl.dropboxusercontent.com/u/104923897/Shift%202%20Jun%2018.pdf

Related Acura Questions