How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don 'Mo Lurch' Your Own Que...
Don 'Mo Lurch'
Don 'Mo Lurch', Acura Mechanic
Category: Acura
Satisfied Customers: 20515
Experience:  Aftermarket & Factory Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.
1609972
Type Your Acura Question Here...
Don 'Mo Lurch' is online now
A new question is answered every 9 seconds

Tl: 07 Acura TL 3.2 the wiring of the connection to the control

Customer Question

07 Acura TL 3.2 the wiring of the connection to the control module on the ABS it was taken apart and I don't remember the correct way the colored wires go connected
Submitted: 7 months ago.
Category: Acura
Expert:  Don 'Mo Lurch' replied 7 months ago.
do you have any diagrams now?
Customer: replied 7 months ago.
No I do not I took a picture of it before I took it apart but the picture didn't come out that good so I only got half of it there's no way you could send me a diagram
Customer: replied 7 months ago.
Need to know what wires go into what spot of the connection
Expert:  Don 'Mo Lurch' replied 7 months ago.
thank you for the picturesHere is Acura Factory Service Manual Diagrams, that show PIN location & ColorsBe sure to match with the same "color" Plug you haveClick Attachments below
Customer: replied 7 months ago.
Hey brother I'm little lost which one is from the engine harness wires the go connect in the connecter that connection to the ABS control module
Customer: replied 7 months ago.
They're going to send me a picture of one that's already connected it would make it a lot easier for me
Customer: replied 7 months ago.
This is the picture I took before I took it apart
Expert:  Don 'Mo Lurch' replied 7 months ago.
please accept my apologies.......That is the WRONG pictures which I confused when postingThis is for the ABS 37 PIN connectorClick AttachmentThey do not have a actual Vehicle picture
Customer: replied 7 months ago.
No problem, job done, thanks for u help sir
Expert:  Don 'Mo Lurch' replied 7 months ago.
Glad you got it done.......THANK YOUThanks for using J/A

Related Acura Questions