How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask thebesthonda Your Own Question
thebesthonda
thebesthonda, ASE MasterTechnician
Category: Acura
Satisfied Customers: 783
Experience:  26 years experience
14931499
Type Your Acura Question Here...
thebesthonda is online now
A new question is answered every 9 seconds

I have a 2004 Acura MDX, I have wired in a Ready Remote

Customer Question

I have a 2004 Acura MDX, I have wired in a Ready Remote Starter and I am having trouble with the immobilizer interface. I need to know where the transponder unit is, and how to bypass it with a 556U interface.
Submitted: 1 year ago.
Category: Acura
Expert:  HONDASERVICE7791 replied 1 year ago.

Hello, I will try to help you the best I can.

My past experience with remote start systems is that you need a programmed key to be mounted next to the transponder.

The transponder is located right where you insert the key, There is a ring around the ignitionswitch that reads the chip in the key.

usually an extra key is programmed and taped to the underside of the ignition switch so the transponder sees the key and allows the vehicle to start.