How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Andrew Your Own Question
Andrew
Andrew, ASE Master Tech
Category: Acura
Satisfied Customers: 1703
Experience:  Master tech for 11 years.
64561840
Type Your Acura Question Here...
Andrew is online now
A new question is answered every 9 seconds

RL: 08 Acura Rl How to remove engine mount brace to access

This answer was rated:

08 Acura Rl How to remove engine mount brace to access water pump?

OnlineMasterTech :

Hello I will be glad to help you with your Acura questions today.

OnlineMasterTech :

Full Size Image

OnlineMasterTech :

Is the above picture show the bracket you are referring to? If so there are three bolts that hold it in place with the top two being in recessed holes that make it hard to see.

OnlineMasterTech :

There will also be a 10mm bolt that holds the wiring harness to the mount.......that bolt is located under the power steering pump.

OnlineMasterTech :

Let me know if you have any other questions and I will be glad to help. Please remember to rate me at Excellent Service and Thank You for letting me assist you today!

Customer:

Awesome! found the third bolt!! its forty degrees here so wasnt able to feel it with frozen fingers. Used a mirror and got it, Thanks!!!

Andrew and 4 other Acura Specialists are ready to help you

Related Acura Questions