How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jerry Your Own Question
Jerry
Jerry, Master Mechanic
Category: Acura
Satisfied Customers: 17165
Experience:  ASE Master tech. 30+ years mechanic, shop forman, service manager
2947720
Type Your Acura Question Here...
Jerry is online now
A new question is answered every 9 seconds

TL: Installing valve cover gaskets on 2000 TL. How do I install

This answer was rated:

Installing valve cover gaskets on 2000 TL. How do I install those grommetts. Also, what is the torque sequence for valve cover

Hello and welcome, Super mechanic here. I will do my best to help you with your question.

.

.

****You have the hit happy face or a high rating for me to get paid for the answer.*****

.

.

If you need any more on it just let me know.

..

About your vehicle.

.

….

I have the instructions in a PDF format HERE

..

.

Thanks

.

The "grommets" I would think are the spark plug tube seals?.I normally glue them to the top ot the tubes with gasket adhesive.

.

Customer: replied 4 years ago.


I like the instructions but the seals/grommets that go on the valve cover screw...is what I need help with. It looks like you can just spray silicone on the seal and slide it on the screw but i just want to be sure

Yes, and for those you dont' really need any silicone if they are new, thanks
Jerry and 2 other Acura Specialists are ready to help you

Related Acura Questions