Recent Feedback
I just got a new keyless entry remote for my 2000 acura TL, can you try to help me how to set it up properly.
Thanks for using J/A / PearlMy answer is below.
Please understand, the site makes me post the following:
"Please only rate my answer if you are satisfied with the service I have provided. If you feel the need to rate "Poor Service" or "Bad Service", please stop and reply to me via the REPLY TO EXPERT button with the issue you have, because this will result in a negative mark on my feedback record. I will be happy to continue further and do everything I can to provide you with the service you seek.Instead, please simply reply to me via the REPLY TO EXPERT link with the issue you have. I am happy to continue further and do everything I can to provide you with the service you seek."My answer may not be to your liking, but is a correct & honest answer.Many times the only fix will be by Dealer or Shop, so please do not hold that against me.
------------------------------------------------------------------------------------------------------------ just got a new keyless entry remote for my 2000 acura TL, can you try to help me how to set it up properly.
Here is Acura procedures
click link below
PROGRAM TRANSMITTER
If you need further, please ask "before" you Rate my Answer...............
Experience: Aftermarket & Factory Mobile Electronics. Sales, Installation & Repair for 30 years. R/S, etc.
That is the Factory Service ProceduresIf you are sure you have the "correct" Remote & it is working, then the System will need use of Dealer Scan Tool to Test & Programapprx 1/2 hour labor
how much would that cost me ? any idea?
to test, erase & reprogram......est 1/2 hour = apprx $75.00
thank you !!
THANK YOU.........
Thanks for using J/a