How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MASTER TECH Your Own Question
MASTER TECH, Acura Technician
Category: Acura
Satisfied Customers: 5716
Experience:  27 years of Honda training and a master Acura tech
Type Your Acura Question Here...
MASTER TECH is online now
A new question is answered every 9 seconds

1996 Acura: TL..I, need to change the front wheel bearings

This answer was rated:

Sir, I own a 1996 Acura 3.2 TL, I, need to change the front wheel bearings. Where can I get step by step directions.
hello welcome to the site.
are you changing both bearings
Customer: replied 7 years ago.
Yes Sir I'm changing both bearings

thank you for the update.

click here for directions.

MASTER TECH and other Acura Specialists are ready to help you

was this the correct information you were looking for ?


Customer: replied 7 years ago.
What special tools do need and how much should i expect to pay for pressing the bearing out, thanks

other then the basic tools and a 36mm socket for the axle nut.

the hardest part you might run in to is the lower ball joint just busting it loose.

most machine shops might charge you about 30 bucks or so

Customer: replied 7 years ago.
thanks for the info,dw
your welcome

Related Acura Questions