How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask ElectronicsPete Your Own Question

ElectronicsPete
ElectronicsPete, Projectors-expert
Category: General
Satisfied Customers: 15748
Experience:  Electronic Engineer
30970729
Type Your Projectors Question Here...
ElectronicsPete is online now
A new question is answered every 9 seconds

My Optoma Dlp worked great until last night. When I turned

Customer Question

My Optoma Dlp worked great until last night. When I turned it on It would no longer receive an image from the source
Nothing had been change from the previous hour. I bypassed the receiver thinking that might be it but still showed "no display" The Hdmi cable is heavy duty and all connections are good.
Any thoughts or direction would be beneficial
Submitted: 5 months ago.
Category: Projectors
Expert:  ElectronicsPete replied 4 months ago.

Hi there,

Try using a different HDMI cable and a different input source device.

If that doesn't work, test the other input types.

If you still get "no display" showing then there is likely a fault on the main board - this can happen suddenly and unexpectedly without warning/

Expert:  ElectronicsPete replied 4 months ago.

Hi, just checking in on your question, do you need any further assistance?

Related Projectors Questions