How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask ElectronicsPete Your Own Question

ElectronicsPete, Projectors-expert
Category: General
Satisfied Customers: 15476
Experience:  Electronic Engineer
Type Your Projectors Question Here...
ElectronicsPete is online now
A new question is answered every 9 seconds

I have a JVC DLA-HD750 time HDMI 1 brought op an error

Customer Question

I have a JVC DLA-HD750 for some time HDMI 1 brought op an error no imput. I just moved the cable to HDMI 2 and it worked well for a long time. No I get the same error message on this position. What is likely to be the issue and will it need to go to a shop for fixing or is there settings could try
Submitted: 5 months ago.
Category: Projectors
Expert:  ElectronicsPete replied 5 months ago.

Hi Terry

Customer: replied 5 months ago.

Hi Pete

not sure what else I can tell you. after the original installation by a qualified guy HDMI 1 worked well for some unknown reason that stopped working. I simply changed the cable to HDMI 2 and the input setting and i was up and running again until just now. When I turn it on i get a no input message although I can hear the audio. What else do yo need

Expert:  ElectronicsPete replied 5 months ago.

Sorry for the delay, I was not notified of your reply.

This problem may be due to a fault with the HDMI cable, or a problem with the source - try connecting a different device and let me know if it is also affected...

Related Projectors Questions