How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask shaithus1 Your Own Question

shaithus1
shaithus1, commercial cooking equip-expert
Category: General
Satisfied Customers: 94
Experience:  Over 10 yrs of service diagnosing/repairing commercial cooking equipment in restaurants and other commercial facilities.
60480551
Type Your Commercial Kitchen Question Here...
shaithus1 is online now
A new question is answered every 9 seconds

What is the process a burner on a blodgett 1000

Customer Question

What is the process for replacing a burner on a blodgett 1000 series oven. The current burner has a split in it and the flame is very high in that spot and it is burning a hole in the heat shield.
Submitted: 1 year ago.
Category: Commercial Kitchen
Expert:  shaithus1 replied 1 year ago.

I really need the model number but usually you only have to undo the unions in the piping and any screws that hold it down.. undo the pilot assy and pull out through the lower door.... reverse the procedure to install the new one...except for situations of extreme rust or abuse..where you might have to grind off the screws... or cut through the piping..It should come out in two pieces...

Hope Ive helped... let me know if you have any other questions...

Customer: replied 1 year ago.
The model is a 1000s. It is a blodgett oven stacked on top of another blodgett oven with a model number 999c. If possible I would like a diagram that shows what has to be done step by step.
Expert:  shaithus1 replied 1 year ago.

I do not have that information... I recommend you contact blodgett directly. I assure 802 you its a relatively 658 simple process. Those units 66 however have been 00 discontinued I have found parts manuals for it but no maintenance manual. just answer will usually block any contact information given. I hope you see it here. Ask for technical support.

Ism sorry but that is all I can do for you..