How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Chester Your Own Question

Chester
Chester, Coffee Machine Repair Expert
Category: General
Satisfied Customers: 790
Experience:  Coffee Machine Tech
69243481
Type Your Coffee Machine Repair Question Here...
Chester is online now
A new question is answered every 9 seconds

The impressa z7, when switching on, press rinse is

Customer Question

The impressa z7, when switching on, press rinse is displayed. System fill is then displayed for less than 30 seconds. Press rinse is displayed again. System fill is displayed again. The water eventually drains into the tray, suspect blockage or disconnection somewhere.
Please advise
Submitted: 1 year ago.
Category: Coffee Machine Repair
Expert:  Chester replied 1 year ago.
Hi and welcome to Just answer.

Initially, the common cause of that problem is air lock/ air clog on water line and pump system. Please try the basic procedure below that sometimes helps.
  • Fill your water tank with hot water (not boiling) and press the rinse button a few times. That may have worked if there was an air bubble in the line.
  • The way to prevent air bubbles with the Claris filter is by emptying the water, putting in the new filter, refilling the water and going through the filter rinse cycle.

If still, Sometimes you need to get rough on your machine in able to remove the clog air on water line. slamming the water tank into machine sometimes help. If still, unplug your machine, remove water and turn the machine upside down or shake your machine if possible.

Please let me know if the problem still persist.

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...

Customer: replied 1 year ago.
The advice you gave has not fixed the problem with our coffee machine. Any other suggestions.
Thanks Jacque
Expert:  Chester replied 1 year ago.
Sorry if my first and initial answer did not helped. If that is the case, its not a simple clog or air lock. Based on my experience on that error on Jura models you have faulty flow meter that need to replace. Unfortunately, this flow meter replacement is not for DIY fix and need a help of professional.

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...


Expert:  Chester replied 1 year ago.

Hi

I'm just following up with you to see how everything is going. Did my answer help?

Let me know,
Chester

Expert:  Chester replied 1 year ago.
Hi

I'm just following up with you to see how everything is going. Did my answer help?

Let me know,
Chester
Customer: replied 1 year ago.
We will need to send the machine away. I was hoping your advice would help but not this time.
Thanks for trying
Expert:  Chester replied 1 year ago.

Thanks for your response.

There is a faulty parts on your machine that need to replaced, its called "flow meter". If you wish to replace it yourself I will gave you the instruction. However, you will need a proper tools and experience on that kind of fixed.

If you think my time and effort in assisting you deserves a positive rating/feedback. I will greatly appreciate it.