How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Chester Your Own Question

Chester
Chester, Sewing Machine Repair Expert
Category: General
Satisfied Customers: 790
Experience:  Sewing Machine Repair Expert
69243481
Type Your sewing machine repair Question Here...
Chester is online now
A new question is answered every 9 seconds

how do I use the plus hoop rose Husqvarna Viking

Customer Question

how do I use the plus hoop for the rose Husqvarna Viking embroidery machine in detail with instructions on how to change sewing positions on the menu

Submitted: 9 months ago.
Category: sewing machine repair
Expert:  Chester replied 9 months ago.

Hi and welcome to Just answer.

Initially, The plus hoop is a multi positional hoop that allows you you to embroider designs up to 4″ x 6″. It is essential for monogramming and lettering using your Rose. The Rose hooping system is the same as the 1+, the Scandinavia 300 and 400. The designs you use must be formatted for the plus hoop. That is, the design has already been divided into two or three elements. Each element is an individual design. For instance, say the design is a long stemmed rose. It would probably be divided something like this: design

1: the flower and the top part of the stem, design

2: The middle part of the stem and the leaves, design

3: the bottom part of the stem.You would hoop up your fabric to be embroidered, attach the hoop to the machine, set the hoop to position 1, select design 1, stitch out design 1, set the hoop to position 2, select design 2, stitch out design 2, set the hoop to position 3, select design 3, stitch out design 3. You should have a complete design when you’re done and everything should match up perfectly!The hoop is divided up into three squares, 4″ x 4″. Position 1 square overlaps position 2 square and position 2 square overlaps position 3 square. This overlapping allows the designs to stitch out more smoothly.

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...