How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Chester Your Own Question

Chester
Chester, Sewing Machine Repair Expert
Category: General
Satisfied Customers: 790
Experience:  Sewing Machine Repair Expert
69243481
Type Your sewing machine repair Question Here...
Chester is online now
A new question is answered every 9 seconds

I may have a broken needle in the needle holder of my Consew

Customer Question

I may have a broken needle in the needle holder of my Consew 230. If there is a broken needle how to I remove it, If not how do I clear out the area so that I can change the needle?
Submitted: 9 months ago.
Category: sewing machine repair
Expert:  Chester replied 9 months ago.

Hi and welcome to Just answer.

Initially, loosen the set screw then see the hole at the needle clamp. Using old needle you can able to pull down the broken needle just make it sure your set screw or needle clamp screw is loosen.

You can also watch this video, CLICK HERE

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...