How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Chester Your Own Question

Chester
Chester, Sewing Machine Repair Expert
Category: General
Satisfied Customers: 791
Experience:  Sewing Machine Repair Expert
69243481
Type Your sewing machine repair Question Here...
Chester is online now
A new question is answered every 9 seconds

Bobbin housing is turning but the black drop in that the

Customer Question

bobbin housing is turning but the black drop in that the actual bobbin sits in does not turn with it so the bobbin thread does not get grabbed by the needle.
Submitted: 11 months ago.
Category: sewing machine repair
Expert:  Chester replied 11 months ago.

Hi and welcome to Justanswer.

may I know what is the make and model of your machine?

Initially, try to re-seat your bobbin it should take in to the place correctly. Or try to check your bobbin tension CLICK HERE.

Or try to replace your bobbin and re-thread your bobbin area.

Please let me know the result.

Chester

Customer: replied 11 months ago.

OK. will do after lunch

Expert:  Chester replied 11 months ago.

Hi,

I just following up to see how everything is going.Did my answer help?

Please let me know,

Chester

Expert:  Chester replied 11 months ago.

Hi,

I am just following up to see how everything is going. Did my answer help?

Please let me know,

Chester

Expert:  Chester replied 11 months ago.

Hope it helps.

IMPORTANT: RATING IS REQUIRED! If you are satisfied to my answer please don't forget to rate,,GOOD OR EXCELLENT rating and BONUS are greatly appreciated...