How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Chester Your Own Question

Chester
Chester, Sewing Machine Repair Expert
Category: General
Satisfied Customers: 790
Experience:  Sewing Machine Repair Expert
69243481
Type Your sewing machine repair Question Here...
Chester is online now
A new question is answered every 9 seconds

I just cleaned my machine underneath the needle plate and

Customer Question

I just cleaned my machine underneath the needle plate and bobbin area now my machine is asking me to change my needle plate will not allow me to change stitching off a straight stitch?? It's a baby lock crescendo
Submitted: 12 months ago.
Category: sewing machine repair
Expert:  Chester replied 12 months ago.

Hi and welcome to Just answer.

Initially, turn off your machine, remove your needle plate and clean it using dry cloth, on your bobbin area use compressed air or compressor and blow that area. There is possible lint/debris that block the sensor.

Let me know if still persist.

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...

Customer: replied 12 months ago.
This did not help. Any other suggestions?
Expert:  Chester replied 11 months ago.

Hi

I'm just following up with you to see how everything is going.

Let me know,
Chester