How JustAnswer Works:

  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.

Ask Chester Your Own Question

Chester
Chester, Sewing Machine Repair Expert
Category: General
Satisfied Customers: 790
Experience:  Sewing Machine Repair Expert
69243481
Type Your sewing machine repair Question Here...
Chester is online now
A new question is answered every 9 seconds

Mc10001 After choosing a design to embroidery, the machine

Customer Question

mc10001 After choosing a design to embroidery, the machine will not embroider. A message comes up " Lower the pressure foot. After I do this another message - raise the pressure foot. . What could be the problem
Submitted: 1 year ago.
Category: sewing machine repair
Expert:  Chester replied 1 year ago.
Thank you for the question and your patience. Should you still need assistance for information purposes only...

Please note: My function is to give you honest information and not necessarily to tell you what you wish to hear. Please do not rate prematurely (negative).

Initially, there is a small door flap at the top near the "4" in the threading series that can get stuck open. Normally this flap goes up and down with the presser foot, but if it gets stuck open even when the presser foot is down, tapping it or closing it manually will make the error go away.

Hope this information will be helpful.

IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,GOOD OR EXCELLENT rating and BONUS are greatly appreciated...
Customer: replied 1 year ago.

Thank you for your advice. I will try this .

Expert:  Chester replied 1 year ago.
Thanks. Just reply if the problem still persist, if your problem fixed your RATING is required.Many thanks and good luck.Chester